Kenvision Techniks Talent Centre
Paving Way for Business Efficiency
Practical ECU Programming Skills Training – Master Automotive Electronics, July 2025
LEARN THAT EXTRA SKILL. USE IT!!
Skills that sell . Results that are dependent on your effort.
Practical ECU Programming Skills Training – Master Automotive Electronics, July 2025
Program Overview:
📍 Venue: Beam Auto & Kenvision Techniks
📅 Dates: 28th July – 8th August 2025
💵 Fee: $300 USD
⏳ Duration: 40 Hours (4 Hours/Day)
📅 Duration: 10 Days (40 Hours) |
📍 Format: Hands-On Training 
🎓 Certification: Provided upon completion
Click the following link to download the course Oultine Document
COURSE DETAILS
🔧 Course Objectives:
By the end of this training, you will:
✅ Understand ECU fundamentals & automotive electronics.
✅ Read, modify, and flash ECU firmware like a pro.
✅ Diagnose & troubleshoot ECU issues using industry tools.
✅ Tune ECUs for performance & efficiency safely.
✅ Work with immobilizers, key programming, and bench flashing.
📅 Daily Breakdown Summary:
Day 1: ECU Basics – Disassemble ECUs, test signals (4h)
Day 2: CAN/LIN Protocols – Capture live CAN data (4h)
Day 3: ECU Cloning – Read/flash via OBD & BDM (4h)
Day 4: Firmware Hacking – Modify maps in WinOLS (4h)
Day 5: Performance Tuning – Adjust fuel/ignition maps (4h)
Day 6: Immobilizer Bypass – Program keys (4h)
Day 7: Advanced Diagnostics – Fix sensor/ECU faults (4h)
Day 8: Bench Flashing – Flash ECUs off-vehicle (4h)
Day 9: DIY ECU – Build a Speeduino unit (4h)
Day 10: Final Project – Showcase your skills! (4h)
Click the following link to download the course Oultine Document
COURSE DETAILS
📌 Daily Breakdown:
# Day 1: Introduction to ECUs
– 🔹 Learn: ECU types, architecture, and components.
– 🛠️ Hands-On: ECU disassembly, signal testing, and datasheet analysis.
# Day 2: ECU Communication Protocols
– 🔹 Learn: CAN, LIN, UDS, and diagnostic communication.
– 🛠️ Hands-On: CAN bus data capture & simulation.
# Day 3: ECU Reading & Cloning 
– 🔹 Learn: OBD/BDM methods & memory structures.
– 🛠️ Hands-On: ECU data extraction & cloning.
# Day 4: ECU Firmware Analysis
– 🔹 Learn: Reverse engineering with WinOLS/IDA Pro.
– 🛠️ Hands-On: Modifying calibration tables.
# Day 5: ECU Tuning (Performance/Economy)
– 🔹 Learn: Fuel/ignition maps & safe tuning.
– 🛠️ Hands-On: Adjusting maps & flashing test ECUs.
# Day 6: Immobilizer & Key Programming
– 🔹 Learn: Immobilizer systems & key coding.
– 🛠️ Hands-On: Key programming & immobilizer bypass.
# Day 7: Advanced Diagnostics
– 🔹 Learn: Fault code analysis & live diagnostics.
– 🛠️ Hands-On: Sensor failure simulation & ECU repair.
Click the following link to download the course Oultine Document
COURSE DETAILS
# Day 8: Bench Flashing & Emulation 
– 🔹 Learn: Flashing without OBD & ECU emulation.
– 🛠️ Hands-On: Bench flashing & emulator testing.
# Day 9: Custom ECU Development
– 🔹 Learn: Open-source ECUs (Speeduino/MegaSquirt).
– 🛠️ Hands-On: Building a basic ECU.
# Day 10: Final Project & Certification
– 🛠️ Hands-On: Real-world ECU project (tuning/cloning/diagnostics).
– 🎓 Certification Award & Feedback Session.
Click the following link to download the course Oultine Document
COURSE DETAILS
🎯 Who Should Attend?
– Automotive technicians
– ECU tuners & programmers
– Embedded systems engineers
– Automotive enthusiasts
💡 Why Join?
– Hands-on labs with real ECUs & tools
– Expert-led training
– Industry-relevant skills for tuning & diagnostics jobs
📩 Limited seats! Register now to secure your spot!
🔗 [Click to download] | 📞 [+254725579251]
🚀 Rev up your skills in ECU programming! 🚀
Click the following link to download the course Oultine Document
COURSE DETAILS
